Sat 19 May 2012
listen this page

The biomechanical properties of the feline femur.

Gibson TW, Moens NM, Runciman RJ, Holmberg DL, Monteith GM. Ontario Veterinary College, Department of Clinical Studies, University of Guelph, Guelph, Ontario, Canada, N1G 2W1. E-mail: tgibson@uoguelph.ca. VCOT 2008 21 4 312-7
The purpose of this study was to determine the biomechanical properties of feline long bone by testing cadaver bone from mature cats in compression, three-point bending, notch sensitivity and screw pull-out strength. The determination of these properties is of clinical relevance with regard to the forces resulting in long bone fractures in cats as well as the behaviour and failure mode of surgical implants utilized for fracture stabilization and repair in the cat. Cadaveric cat femurs were tested in compression, three-point bending and in three-point bending after the addition of a 2.0 mm screw hole. Cortical screws, 2.7 mm in diameter, were inserted in cadaveric cat femur samples for screw pull-out testing. The mean maximum load to failure of mid diaphyseal feline femurs tested in compression was 4201 +/- 1218 N. Statistical analysis of the parameter of maximum load tested in compression revealed a statistical difference between sides (p = 0.02), but not location (p = 0.07), or location by side (p = 0.12). The maximum strength of mid diaphyseal feline femurs tested in compression was 110.6 +/- 26.6 MPa. The modulus of elasticity of mid-diaphyseal cat femurs tested in compression was determined to be 5.004 +/- 0.970 GPa. The mean maximum load to failure of feline femurs tested in three-point bending was 443 +/- 98 N. The mean maximum load to failure of feline femurs tested in three-point bending after a 2.0 mm diameter hole was drilled in the mid-diaphyseal region of each sample through both cortices was 471 +/- 52 N. The mean maximum load required for screw pull-out of 2.7 mm cortical screws placed in feline femurs tested in tension was 886 +/- 221 N. This data should be suitable for investigating fracture biomechanics and the testing of orthopaedic constructs commonly used for fracture stabilization in the feline patient.

Official newsletter

Stay informed with OrthoVetSuperSite Newsletter

Small Animals Poll Large Animals Poll

Jobs

OrthoVet Books

MARTINI
Patologie articolari nel cane e nel gatto
1st ed., 400 pages, 407 ill., Poletto Editore, May 2006
List price: € 100,00
Sell price: € 85,00
STASHAK
Adams' lameness in horses
5th ed., 1174 pages, 850 ill., Lippincott Williams & Wilkins, June 2002
List price: € 119,00
Sell price: € 101,00
KRAUS
External fixation in small animal practice
1st ed., 233 pages, 300 ill., Blackwell Science, December 2003
List price: € 91,00
Sell price: € 77,00
GREENOUGH
Bovine laminitis and lameness. A hands-on approach
1st ed., 328 pages, 495 ill., W.B. Saunders, July 2007
List price: € 90,99
Sell price: € 77,00
COUGHLAN
Manual of small animal fracture repair and management
1st ed., 348 pages, 500 ill., BSAVA Publications, June 1998
List price: € 99,00
Sell price: € 84,00

Vet Events

Events

« May 2012 »
SunMonTueWedThuFriSat
12345
6789101112
13141516171819
20212223242526
2728293031